Sighting in on 'Sights'

Having a problem getting your sights sighted in? What if you do and something moves how do you know? Here is some small advice.

First, check all your screws making sure they are tight. With a high-speed bow, like my Martin, I check every other time I shoot.

Second, after you are shooting well and your pins are right on what should you do? Well here is a tip:

Put an arrow on the string and take these measurements. Put a ruler on the arrow that is sitting on your rest. Measure up to each pin and write down how far the pin is above your arrow and write it down. Then, measure from the riser to the tip of your pin and write that down. Why?

Here is why. If your pin moves or gets broken (fiber pins often do) you will know where that one broke or came loose. Now if your arrow rest is where it was before, you can put the new pin in exactly where the other pin was. Fast, easy and simple. 

This often comes in handy while in the field where every thing that can go wrong, does. Remember to take extra pins, small ruler (six inch) and an Allen (hex) wrench set; you will be glad you did.